Brother MFC-490CW User Manual page 160

CAUTION
Make sure that the plastic tabs on both
sides of the green protective part (1) have
securely clicked into place (2).
1
If you are not able to find the green
protective part, DO NOT remove the ink
cartridges before shipping. It is essential
that the machine be shipped with either the
green protective part or the ink cartridges in
position. Shipping without them will cause
damage to your machine and may void your
warranty. When travelling with the ink
cartridges still in the machine please keep
the machine upright as this will protect the
machine from leakage.
148
d
2
e
f
g
h
Lift the front of the machine and hook
the long end (1) of the green protective
part into the T-shaped hole underneath
the machine. Push the forked end (2)
onto the top of the paper tray.
2
1
Unplug the machine from the telephone
wall socket and take the telephone line
cord out of the machine.
Unplug the machine from the electrical
socket and from the machine.
Using both hands, use the plastic tabs
on both sides of the machine to lift the
scanner cover until it locks securely into
the open position. Then unplug the
interface cable from the machine, if it is
connected.
Lift the scanner cover (1) to release the
lock. Gently push the scanner cover
support down (2) and close the scanner
cover (3) using both hands.
2
1
3