Condensation Has Formed Inside The Printer - Xerox Phaser 6600 User Giude

Troubleshooting

Condensation has Formed Inside the Printer

Moisture can condense inside a printer where the humidity is above 85% or when a cold printer is
located in a warm room. Condensation can form in a printer after it has been sitting in a cold room
that is heated quickly.
Probable Causes
The printer has been sitting in a cold room. Allow the printer to operate for several hours at room
The relative humidity of the room is too
high.
146 Phaser 6600 Color Printer
User Guide
Solutions
temperature.
• Reduce the humidity in the room.
• Move the printer to a location where the temperature and
relative humidity are within the operating specifications.