Xerox Phaser 6600 User Giude page 37

To connect to a WPS wireless network using the PIN method:
Note: The wireless router must be connected and properly configured for the network before you
install the printer.
1. At your computer, open the router control panel, then select Add WPS Client. For details, see
your router documentation.
2. Select PIN Method. The router control panel opens to a dialog box ready for the PIN number.
Note: The following steps can vary with different router manufacturers.
3. At the printer control panel, press the Menu button.
Note: To navigate through the menu, use the Up or Down arrow buttons.
4. Navigate to Admin Settings, then press OK.
5. Navigate to Network Setup, then press OK.
6. Navigate to WPS Setup, then press OK.
7. Navigate to PIN Code, then press OK.
8. Navigate to Print PIN Code, then press OK or record the PIN Code from the control panel
display.
The PIN is printed at the top of the PIN Code Print.
9. Navigate to Start Configuration, then press OK.
The printer starts advertising using the PIN Code that it printed on the sheet.
Note: The printer continues to advertise for 120 seconds. If it does not find the wireless router
within 120 seconds, the connection attempt stops and the printer generates a new PIN.
10. At your computer, enter the PIN Code in the Client PIN Code field of the router control panel,
then click Next.
The printer communicates with the router to resolve setup and configuration information. When
the printer has the correct information, it connects to the router and restarts with the proper
setup and configuration information. If it does not connect with the printer within 120 seconds,
the connection attempt stops.
11. After the printer restarts, wait 20 seconds, then print a Configuration Report to get network
information including the IP address.
Note: If the printer does not connect to the wireless router, it generates a new PIN Code for the
next attempt. Do not try to use the old PIN for another attempt.
Collecting Wireless Network Information for Connecting to a Wireless Network
Manually
When connecting to a wireless network that does not include a WPS-compliant router, set up and
configure the printer manually. Before starting, you must get the setup and configuration information,
such as name and passphrase, from the router. After you collect the network information, you can
set up the printer from the control panel or from CentreWare Internet Services. For the easiest
manual connection, use CentreWare Internet Services.
Installation and Setup
Phaser 6600 Color Printer
User Guide
37