Configuring Trays 1 Or 2 For The Paper Length - Xerox Phaser 6600 User Giude

Paper and Media
6. Adjust the width guides until they touch the edges of the paper.
7. If the control panel prompts you, verify the size and type on the screen.
a. At the printer control panel, press the Menu button.
Note: To navigate through the menu, use the Up or Down arrow buttons.
b. Navigate to Tray Settings, then press OK.
c. Navigate to Bypass Tray, then press OK.
d. Navigate to Tray Mode, then press OK.
e. Navigate to Panel Specified, then press OK.
f. To return to the previous menu, press the Left arrow button.
g. Navigate to Paper Size, then press OK.
h. To select a setting, press the Up or Down arrow buttons, then press OK.
i. To return to the previous menu, press the Left arrow button.
j. Navigate to Paper Type, then press OK.
k. To select a setting, press the Up or Down arrow buttons, then press OK.

Configuring Trays 1 or 2 for the Paper Length

You can adjust the lengths of Trays 1 and 2 to accommodate A4/Letter and Legal paper sizes. In the
Legal length settings, the trays protrude from the front of the printer.
To change the 550-Sheet Feeders in Trays 1 and 2 to match the paper length:
1. Remove all paper from the tray.
2. To remove the tray from the printer, pull out the tray until it stops, lift the front of the tray slightly,
then pull it out.
90 Phaser 6600 Color Printer
User Guide