Configuring System Settings - Xerox Phaser 6600 User Giude

Installation and Setup
1. At the printer control panel, press the Menu button.
Note: To navigate through the menu, use the Up or Down arrow buttons.
2. Navigate to Admin Settings, then press OK.
3. Navigate to System Settings, then press OK.
4. Navigate to Power On Wizard, then press OK.
5. Navigate to Yes, then press OK.
6. To select your language, press OK.
7. Navigate to your language, then press OK.
8. Navigate to Set Date & Time, then press OK.
9. To select the Greenwich Mean Time (GMT) offset for your time zone, press the Up or Down
arrow buttons. To accept the time zone, press OK.
10. To set the month, press the Up or Down arrow buttons. To move to the Day field, press the
Right arrow button.
11. To set the day, press the Up or Down arrow buttons. To move to the Year field, press the Right
arrow button.
12. To set the year, press the Up or Down arrow buttons. When finished, press OK.
13. To set the hour, press the Up or Down arrow buttons. If the time format is set to 12H, ensure
that you set the hour correctly for AM or PM. To move to the Minutes field, press the Right arrow
button.
14. To set the minutes, press the Up or Down arrow buttons. When finished, press OK.
15. To exit the Power On Wizard, use the Down arrow to select Exit Menu, then press OK twice.

Configuring System Settings

Use this menu to configure system settings of the printer. For example, time to Energy Saver mode,
alarm settings, and so on.
Accessing the System Settings Menu
1. At the printer control panel, press the Menu button.
Note: To navigate through the menu, use the Up or Down arrow buttons.
2. Navigate to Admin Settings, then press OK.
3. Navigate to System Settings, then press OK.
54 Phaser 6600 Color Printer
User Guide