Xerox Phaser 6600 User Giude page 163

Symptom
Partial blanks, creased paper,
or blotted printing.
Vertical blanks appear.
Probable Causes
The paper is damp.
The paper is outside the
recommended specification
range.
The printer is worn or
damaged.
The toner cartridges are not
®
Xerox toner cartridges.
The paper is impeded in the
paper path.
Condensation inside the printer
causes partial blanks or
creased paper.
The lenses are blocked.
The printer is worn or
damaged.
The toner cartridges are not
®
Xerox toner cartridges.
Solutions
Replace the paper.
Replace the paper with a recommended
size and type. For details, see
Paper on page 84.
For assistance, go to the Xerox
website at
www.xerox.com/office/6600support.
Verify that the toner cartridges meet
specifications and replace if necessary. For
details, see Consumables
• Remove any paper or debris from the
paper path.
• Ensure that the trays are pushed in all
the way.
• Ensure that the rear cover is closed and
locked.
Turn on the printer and leave it on for at
least one hour to get rid of the
condensation. For assistance, go to the
®
Xerox Support website at
www.xerox.com/office/6600support.
Clean the lenses in the inside of the printer.
For details, see Cleaning the Laser Lenses
on page 117.
For assistance, go to the Xerox
website at
www.xerox.com/office/6600support.
Ensure that the toner cartridges meet
specifications and replace if necessary.
Phaser 6600 Color Printer
Troubleshooting
Supported
®
Support
on page 133.
®
Support
163
User Guide