Printer Resets Or Turns Off Frequently; Printer Does Not Print - Xerox Phaser 6600 User Giude

Printer Resets or Turns Off Frequently

Probable Causes
The power cord is not plugged into the
outlet correctly.
A system error occurred.
The printer is connected to an
uninterruptible power supply.
The printer is connected to a power strip
shared with other high-power devices.

Printer Does Not Print

Probable Causes
The printer is in Energy Saver mode.
The printer has an error.
The printer is out of paper.
A toner cartridge is empty.
The Error Indicator is blinking.
Both control panel indicators are off.
Solutions
Turn off the printer, confirm that the power cord is plugged in
correctly to the printer and the outlet, then turn on the printer.
Turn off the printer, then turn it on again. Print the Error History
from the Information Pages of the Printer Setting Utility. If the
error persists, contact your Xerox representative.
Turn off the printer, then connect the power cord to a suitable
outlet.
Plug the printer directly into the outlet or into a power strip that is
not shared with other high-power devices.
Solutions
Push the control panel button.
Follow the instructions on the control panel to clear the error. If
the error persists, contact your Xerox representative.
Load paper into the tray.
Replace the empty toner cartridge.
If the Ready Indicator is off, the printer has stopped working. Turn
off the printer, then turn it on again. If the error persists, contact
your Xerox representative.
Turn off the printer, confirm that the power cord is plugged in
correctly to the printer and the outlet, then turn on the printer. If
the error persists, contact your Xerox representative.
Troubleshooting
Phaser 6600 Color Printer
User Guide
143