Installation And Setup Overview - Xerox Phaser 6600 User Giude

Installation and Setup

Installation and Setup Overview

Before printing, your computer and the printer must be plugged in, turned on, and connected.
Configure the initial settings of the printer, then install the driver software and utilities on your
computer.
You can connect to your printer directly from your computer using USB, or connect over a network
using an Ethernet cable or wireless connection. Hardware and cabling requirements vary for the
different connection methods. Routers, network hubs, network switches, modems, Ethernet cables,
and USB cables are not included with your printer and must be purchased separately. Xerox
recommends an Ethernet connection because it is typically faster than a USB connection, and it
provides access to CentreWare Internet Services.
Note: If the Software and Documentation disc is not available, you can download the latest
drivers from www.xerox.com/office/6600drivers.
See also:
Selecting a Location for the Printer
Choosing a Connection Method
Connecting the Printer
Configuring Network Settings
Installing the Software
30 Phaser 6600 Color Printer
User Guide
on page 31
on page 32
on page 32
on page 43
on page 78