Routine Maintenance; Replacing Staple Cartridges - Xerox WorkCentre 7220 User Manual

Routine Maintenance

This section includes:
•

Replacing Staple Cartridges ....................................................................................................................................... 177

• Emptying the Hole Punch Waste Container ........................................................................................................ 181
For information on ordering supplies, see
Replacing Staple Cartridges
A message appears on the control panel when a staple cartridge is empty.
Replacing Staples in the Integrated Finisher
1. Open the finisher front door.
2. Grip the staple cartridge by the orange handle and pull it firmly toward you to remove it.
3. Remove any loose staples or other debris from inside the finisher.
4. Pinch both sides of the staple case (1) and remove the staple case from the cartridge (2).
Ordering Supplies on page 184.
WorkCentre 7220/7225 Multifunction Printer
Maintenance
177
User Guide