Xerox WorkCentre 7220 User Manual page 180

Maintenance
7. Grip the staple cartridge by the orange handle and insert it into the stapler assembly. Push it in until
it clicks.
8. Close the finisher front door.
Replacing Staples in the Booklet Maker of the Office Finisher LX
WARNING: Do not perform this procedure while the printer is printing.
1. Open the finisher side cover.
2. If the staple cartridges are not visible, grip the vertical panels at the left and right of the opening
and slide them to the center.
180 WorkCentre 7220/7225 Multifunction Printer
User Guide