Xerox WorkCentre 7220 User Manual page 58

Paper and Media
− Load transparencies face down with the long edge, or stripe, leading into the printer.
− For short-edge feed, insert letterhead and pre-printed paper face up with the top edge leading
into the printer. Load hole punched paper with the holes toward the back.
− Load labels face down with the top edge to the left.
Note: Do not load paper above the maximum fill line. Overfilling the tray can cause the printer to
jam.
5. Adjust the width guides until they touch the edges of the paper.
6. When prompted, select an option:
− To confirm the paper type and size, touch Confirm.
− To select a new paper size, touch Size. To select a new paper type, touch Type. To select a new
paper color, touch Color. When finished, touch Confirm.
Notes:
• To change the size, type, and color of paper when the control panel is locked, log in as the
system administrator.
• For details, see
58 WorkCentre 7220/7225 Multifunction Printer
User Guide
Changing Paper Size, Type, and Color on page 60.