3
To be able to feed thin paper (17 to 20-lb bond (64 to 79 g/m
paper deck (option), you will first have to designate the drawer or the paper deck as
the feeding location for thin paper.
.
IMPORTANT
•
The stack bypass cannot be designated as the feeding location for thin paper.
.
NOTE
•
No feeding location for thin paper is specified by default.
.
1
2
.
NOTE
•
Paper feeding locations that are already designated for use with thin paper are
highlighted.
•
To cancel the feeding location setting for thin paper, press the highlighted feeding
location. The highlight and the thin paper icon disappear, indicating that the setting
is canceled.
•
When a drawer or the paper deck (option) is designated as the feeding location for
thin paper, its Drawer Eligibility for APS/ADS setting is not automatically set to
<Off>. If you do not want to copy onto thin paper when making copies in the Auto
Paper Selection mode, make sure to set the Drawer Eligibility for APS/ADS setting
for the feeding location for thin paper to <Off>.
2
➔
➔
Customizing the Copier's Global Settings
)) from drawers or the
➔