To feed transparencies from drawers, you will first have to designate the drawer as
the feeding location for transparencies.
.
IMPORTANT
•
The stack bypass and the paper deck (option) cannot be designated as the feeding
location for transparencies.
.
NOTE
•
No feeding location for transparencies is specified by default.
.
1
2
.
IMPORTANT
•
Loading a drawer designated as the feeding location for transparencies with plain
paper will lead to paper jams. To use such a drawer with plain paper, cancel the
drawer's designation as the feeding location for transparencies.
.
NOTE
•
Only LTR and LTRR drawers can be designated as the feeding locations for
transparencies.
•
Drawers that are already designated for use with transparencies are highlighted.
•
To cancel the feeding location setting for transparencies, select the highlighted
drawer again. The highlight and the transparency icon disappear, indicating that the
setting is canceled.
•
Drawers designated as the feeding location for transparencies cannot be turned on
for Drawer Eligibility for APS/ADS.
Customizing the Copier's Global Settings
➔
➔
➔