Sorting or Staple-sorting Stops
When making two-sided copies, sorting may stop if the copies have markedly
different copy exposures on the front and rear sides of the paper. Also, the sorting
of LTRR-size copies may stop depending on the copy exposure. When this
happens, the following message is displayed.
Copying will automatically resume after you remove the copies from the bins.
.
NOTE
•
If the number of output sheets exceeds the stapling capacity, the copies will be sorted but
not stapled. In this case, manual stapling is also disabled.
•
The screen that appears differs depending on the options attached.
Copies Are Not Stapled Together
I
Depending on the copy exposure, stapling may not be executed when copying on LTRR-
size paper even if the Staple-sort function is specified. When this happens, the following
message is displayed.
Manual stapling is also disabled when this happens. Remove all copies from the bins.
.
NOTE
•
The screen that appears differs depending on the options attached.
Stapler Sorter-F2