Oce CS120 Reference Manual page 192

.
IMPORTANT
•
Even out the edges of the originals before placing them into the original tray.
•
STMT-size originals can only be placed vertically.
•
Do not place originals of different sizes together into the original tray.
•
Make sure that there is no original on the platen glass before placing your originals
into the original tray.
.
NOTE
•
Place LTR-size originals from 32-lb bond to 110-lb index (129 to 200 g/m
weight vertically.
•
Flip open the auxiliary tray when placing 11" x 17"-, LGL-, or LTRR-size originals
into the original tray.
•
The number of originals that can be placed into the feeder's original tray at one
time is as follows:
- 11" x 17", LGL:
- LTR, LTRR, STMT: 100 sheets (20-lb bond (80 g/m
3
.
IMPORTANT
•
Do not add or remove originals from the original tray after copying begins.
•
Regardless of whether or not the Original Recognition function is turned on, the
feeder automatically detects the size of the originals once originals are placed into
the original tray. If you want to place originals on the platen glass and have the
copier automatically detect the size of the original, make copies with the feeder
lifted up.
Recirculating Document Feeder RDF-E3
50 sheets (20-lb bond (80 g/m
2
) in
2
))
2
))