Oce CS120 Reference Manual page 164

If a paper jam occurs in the fixing unit area, a screen similar to the one shown
below appears on the touch panel display. Check the location of the paper jam, and
using the screen on the touch panel display as a reference, follow the procedure
described below to remove the jammed paper.
•
.
IMPORTANT
•
Before removing jammed paper from the fixing unit area, always check for paper jams in
the right side door, left side door, and the output area first. (See "Removing Paper Jams
in the Right Side Door," on p. 4-7 , "Removing Paper Jams in the Output Area," on p. 4-9 ,
and "Removing Paper Jams in the Left Side Door (CLC 1180 only)," on p. 4-11.)
If paper is jammed in the right or left side of the main assembly, make sure to remove that
paper first. If you pull the main assembly out without removing the jammed paper, the
paper may tear and leave paper pieces inside the copier.
.
NOTE
•
The screen that appears differs depending on the options attached.
Removing Paper Jams