I
11" x 17", LGL, LTR, LTRR, STMT
I
The number of originals that can be placed into the feeder's original tray at one time is as
follows:
11" x 17", LGL:
LTR, LTRR, STMT:
.
IMPORTANT
•
Do not place the following types of originals in the feeder:
- Originals with tears or large binding holes
- Severely curled originals or originals with sharp folds
- Clipped or stapled originals
- Carbon-backed paper or other originals which might not feed smoothly
- Transparencies and other highly transparent originals
•
Originals that are themselves color copies may not feed properly through the feeder,
particularly if they are copies that contain a large amount of toner. For these types of
originals, it is highly recommended that you use the platen glass for making copies.
•
When you use originals that are themselves color copies, it is highly recommended that
you use the single sheet document feeder. If you place originals onto the original tray,
they may be folded or torn.
•
If you load color copy originals and other types of originals together, the maximum
loading capacity changes to the following:
- 11" x 17", LGL:
- LTR, LTRR, STMT: 50 sheets
•
Always check the condition of originals that have been fed through the feeder repeatedly.
When making copies of the same originals repeatedly, they may become folded or
wrinkled and may not feed smoothly.
Recirculating Document Feeder RDF-E3
50 sheets (20-lb bond (80 g/m
100 sheets (20-lb bond (80 g/m
25 sheets
2
))
2
))