Staple Sort Mode - imagistics im2330 Operator's Manual

Staple sort mode

When the Finisher (optional) is installed, automatic stapling is enabled. You can select the stapling position
from three types.
• The paper quantity and weight applicable for this mode differ depending on the Finisher installed in this
equipment. See P.104 "Maximum number of sheets for stapling".
• Special paper such as OHP films or sticker label cannot be used for stapling.
• Only copies of the same width can be stapled. (e.g. LT and LD or LT-R and LG)
(Example of selecting the [FRONT STAPLE] button)
1
Place paper in the drawer(s).
• When using this mode in bypass copying, specify the paper size in advance. (
2
Place the original(s).
3
Press the finisher button on the basic menu.
P.69 "3.Bypass Copying")
3
103