Scan To E-Filing - imagistics cm4530 Operator's Manual

2. SCAN TO e-FILING

In this function, the scanned original data can be stored in the e-Filing. You can scan up to 200 sheets of
LT size per 1 job. During scanning, you can perform the SCAN TO E-FILING or the SCAN TO E-MAIL
simultaneously, as required. After storing the original data, you can print it at any time.
To store the original data, you can specify the public box or one of user boxes. The public box is a pre-set
box since the installation of the equipment, and it will be used to store documents that any user may need
to work with. The user box is the one created by the user, and, if password is set, you need to enter the
password correctly.
Before storing the original data in e-Filing, you need to set up the user boxes. For setting up the user boxes
and printing the stored documents, see "2.SETTING UP BOX"
DOCUMENT"
* It is recommended to back up the data on the equipment's hard disk to prevent loss of data. You can back
it up with the client PC using the File Downloader. See the [e-Filing Guide] for details.
You can also store the copied original data in the e-Filing using the copy operation. ("1.STORE TO e-
FILING" Page 138) However, when you use the original data with the client PC via network, it is
recommended to store the original data using the scanning operation explained here, rather than using the
copy operation.
7
1
Place the original(s).
- "2.SETTING ORIGINALS"
- If there is not enough space in the hard disk, the number of
originals that can be scanned may be restricted.
The reversing automatic document feeder (optional) enables
consecutive scanning of more than one original.
2
Press the [SCAN] button on the control
panel to enter the scan menu.
148
7.SCANNING IMAGES
Page 223.
Page 45
Page 218 and "5.PRINTING STORED