imagistics cm4530 Operator's Manual page 2

The United States Environmental Protection Agency (EPA) has introduced a voluntary program, the
E S
NERGY TAR program, to encourage the widespread and voluntary use of energy-efficient technologies
that enhance the workplace, improve product performance and prevent pollution. As an
Partner, the Imagistics International Inc. has determined that this copier model meets the
guidelines for energy efficiency.
For Copier/Printer + Fax models,
to have a 'Sleep Mode' feature that automatically makes the copier enter the sleep mode after a period of
inactivity. The copier must also automatically change to a 'Low Power Mode' (Automatic Energy Save) after
a period of time since the last usage.
cm4530/cm3530 Copier/Printer + Fax model (multifunction model)
'Sleep Mode'
The copier consumes less than 80 watts (cm3530)/90 watts (cm4530) in the 'Sleep Mode'.
'Sleep Mode' Default Time-
The default time while in 'Sleep Mode' is 60 minutes (cm3530)/90 minutes (cm4530).
'Automatic Energy Save'-
The copier consumes less than 184.75 watts (cm3530)/223.25 watts (cm4530) while in 'Energy
Save Mode'.
'Automatic Energy Save' Default Time-
The default time before switching to 'Automatic Energy Save Mode' is 15 minutes.
Note 1- The default setting for 'Sleep Mode' and 'Automatic Energy save' can be changed.
Note 2- In the sleep mode, if the Fax or printer data is received, the copier starts warming itself up and
prints out the data when it becomes ready. Also, when the start button or the energy saver button
on the control panel is pressed, the copier starts warming itself up.
E S
NERGY TAR is a U.S. registered mark.
E
EPA
E S
NERGY TAR guidelines require
S
NERGY TAR ® (MFD)
E
NERGY
E S
NERGY
E
NERGY
S
TAR multifunction copiers
TAR
S
TAR