Specifying Both Original Size And Copy Size - imagistics cm4530 Operator's Manual

3.REDUCTION AND ENLARGEMENT COPYING (Cont.)
3
Press the [AMS] button.
- "Setting the [OTHER SIZE] button"
4
Place the original(s). "2.SETTING
ORIGINALS"
- The built-in sensors automatically detect the size of the original(s)
3
and compute the reproduction ratio with the specified paper size
respectively.
- If "Change direction of original" appear, proceed as directed:
Select other copy modes as required.
5
Press the [START] button.

Specifying Both Original Size and Copy Size

1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER"
2
Place the original(s).
- "2.SETTING ORIGINALS"
3
Press the desired drawer (or
button), and then the [ZOOM] button.
- The copy paper size is selectable on the menu in step 4 as well.
74
3.SETTING BASIC COPY MODES
Page 69
Page 45
Page 36
Page 45
,