Step 7: Connect To The Internet - NetComm NTC-223 Quick Start Manual

Step 7: Connect to the Internet

If the SIM Status is OK, the router automatically attempts to connect to the Internet
by detecting the correct APN and connection details.
If automatic configuration was unsuccessful, you must manually enter the
connection details.
To manually configure the connection profile:
1. From the top menu bar, select the Networking option.
Next to Profile1, click the
2.
screen is displayed.
Ensure that the Automatic APN selection toggle key is set to the OFF
3.
position.
In the APN field, enter the APN name that your carrier requires for mobile
4.
broadband connection. If required, enter the Username and Password in the
Username and Password fields. Click the Save button.
The connection profile is now configured.
Verifying the connection status
Click on the Status menu item from the top menu bar. The Status page is
displayed. The mobile broadband connection is established successfully if the
Status field in the WWAN connection status section displays Connected.
NTC-223 4G LTE Cat 1 Industrial IoT Router
button. The Data connection profile settings
17