System Error - Bell and Howell 500 FB Operator's Manual

4
Return the green release lever to
its original position.
5
Inspect the original for tears or
curling. If it is in good condition,
return it to the starting position
on the document feeder and
restart the scan job. If the original
is wrinkled, smooth it out and
scan using the Book Mode.

System Error

Indicator
Color Green Green
Status Flashing Flashing
This error indicates a scanner system error.
1
Turn the scanner off.
2
Turn the scanner back on.
Note: If this error persists, contact your service representative.
Green Red
Flashing Flashing
TROUBLESHOOTING
4-5