Recommended System Configuration Guidelines; Scanner Environment - Bell and Howell Copiscan 8000 Spectrum Operator's Manual

3.1

Recommended System Configuration Guidelines

NOTE:
Contact your scanning application software vendor for system requirements, since the
application software drives the system requirement piece, not the scanner.
The following lists PC requirements:
Windows 98 SE/ME, 2000, or XP
• To maximize throughput: Pentium IV 1.6 GHz, 512 MB RAM or
PC Host
• Minimum: Pentium III 700 MHz, 256 MB RAM
• When scanning in color, Host PC Display properties ideally
NOTE:
Please consult the Kofax Adrenaline 650i manual, enclosed in the box it came in, if
you need any help with the interface board.
3.2

Scanner Environment

The scanner equipment has been designed to operate in a normal office environment.
Please note the following environmental requirements:
• Place the scanner in a clean, well-ventilated room, free of combustible vapors.
• The minimum clearance in back for the cables should be 6" (152 mm). The minimum
clearance on the left side for the left entry door should be 15" (381 mm).
• Make sure all electrical outlets are properly grounded. Use of a dedicated power line
is recommended.
• Place the scanner at the front edge of a level surface.
www.bbhscanners.com
1-800-SCAN-494 Sales
1-800-SCAN-495 Technical Support
Copiscan 8000 Spectrum Operator Manual
better
should be set to "True Color (32 bit)" or "High Color (16 bit)" at
a minimum.
11