The Rear Ports - Billion BiPAC 7404VNOX User Manual

3g/voip/802.11n adsl2+ (vpn) firewall router
Hide thumbs Also See for BiPAC 7404VNOX:
Table of Contents

Advertisement

The Rear Ports

Port
1
Antenna
2
DSL
Line
3
(Router with LINE port only)
Phone
4
1x - 2x (RJ-11 connector)
5
Console Port
6
USB
Giga Ethernet 1x - 4x
7
(RJ-45 connector)
8
WPS
9
RESET
10 Power
11
Power Switch
Connect the detachable antenna to this port.
Connect this port to the ADSL/telephone network with the RJ-
11 cable (telephone) provided.
Connect this port to the telephone jack on the wall with RJ-11
cable.
Connect this port to an analog phone set with RJ-11 cable.
Plug in the console cable provided.
Connect the USB cable to this port.
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of
the LAN ports when connecting to a PC or an office/home
network of 10Mbps, 100Mbps or 1000Mbps.
Push WPS button for less than 5 sec to trigger Wi-Fi
Protected Setup function; push WPS button for more than 5
sec to enable/disable WLAN Service.
To be sure the device is being turned on press RESET button
for:
1-3 seconds: quick reset the device.
6 seconds and above, power off, power on the device: restore
to factory default settings. (Cannot login to the router or forgot
your Username/Password. Press the button for more than 6
seconds).
Caution: After pressing the RESET button for more than
6 seconds, to be sure you power cycle the device again.
Connect it with the supplied power adapter.
Power ON/OFF switch.
7
Meaning

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bipac 7404vnpx

Table of Contents