Fixed Ip Address - Billion BiPAC 7404VNOX User Manual

Fixed IP Address

Select this option to set static IP information. You will need to enter the Connection type, IP address,
netmask, and gateway address, provided to you by your ISP. Each IP address entered in the fields
must be in the appropriate IP form, which are four IP octets separated by a dot (x.x.x.x). The Router
will not accept the IP address if it is not in this format.
Profile Port: Select the profile port as EWAN.
Protocol: Select Fixed IP Address.
IP: Your WAN IP address. Leave this at 0.0.0.0 to automatically obtain an IP address from your ISP.
Netmask: The default is 0.0.0.0. User can change it to other such as 255.255.255.0.Type the
netmask assigned to you by your ISP (if given).
Gateway: You must specify a gateway IP address (supplied by your ISP).
NAT: The NAT (Network Address Translation) feature allows multiple users to access the Internet
through a single IP account, sharing the single IP address. If PCs in LAN should share the WAN IP for
WAN access, please enable NAT. If users on your LAN have public IP addresses and can access the
Internet directly, the NAT function can be disabled.
MAC Spoofing: Select Enable and enter a MAC address that will temporarily change your router's
MAC address to the one you have specified in this field. Leave it as Disabled if you do not wish to
change the MAC address of your router.
Obtain DNS: Select Automatic to use DNS.
Primary DNS/ Secondary DNS: Enter the IP addresses of the DNS servers. The DNS servers are
passed to the DHCP clients along with the IP address and the subnet mask.
IPv6: check to enable IPv6 service. Enter IPv6 Gateway address and set IPv6 DNS as same in IPv4
mode.
IP/Prefix Length: Please specify the IP and the prefix length for the IPv6 address from your ISP.
Gateway: Type the gateway to which the WAN packets are forwarded.
Obtain IPv6 DNS: check Automatic to obtain DNS automatically. If not, please type the concrete
ones in the Primary and secondary fields.
86