Adsl Mode - Billion BiPAC 7404VNOX User Manual

ADSL Mode

Connect Mode: This mode will automatically detect your ADSL line code, ADSL2+, ADSL2,
AnnexM2 and AnnexM2+, ADSL, All. Please keep the factory setting unless ADSL is detected as the
symptom of synchronization problem.
Modulation: It will automatically detect capability of your ADSL line mode. Please keep the factory
setting unless ADSL is detected as the symptom of synchronization problem.
Profile Type: Please keep the factory settings unless ADSL is detected as the symptom of low link
rate or unstable problems. You may need to change the profile setting to reach the best ADSL line
rate, it depends on the different DSLAM and location.
Activate Line: Aborting (false) your ADSL line and making it active (true) again for taking effect with
setting of Connect Mode.
Coding Gain: It reduces router's transmit power which will effect to router's downstream
performance. Higher the gain will increase the downstream rate but it sometimes causes unstable
ADSL line. The configurable ADSL coding gain is from 0 dB to 7dB, or automatic.
Tx Attenuation: It is the ADSL transmission power that the modem is using. The lower the power the
better performance in router's upstream. Configurable value is between 0~12.
Elapsed Time: the time since ADSL connection is established.
90