Billion BiPAC 7404VNOX User Manual page 109

Example:
Application: Cindy_HTTP
Time Schedule: Always On
Source / Destination IP Address(es): 0.0.0.0 (I do not wish to active the address-filter, instead I
use the port-filter)
Type: TCP (Please refer to Table1: Predefined Port Filter)
Source Port: 0-65535 (I allow all ports to connect with the application))
Redirect Port: 80-80 (This is Port defined for HTTP)
Inbound / Outbound: Allow
1. The new port filter rule for HTTP is shown below:
2. Configure your Virtual Server ("port forwarding") settings so that incoming HTTP requests on
port 80 will be forwarded to the PC running your web server:
106