Edit One-To-One Nat (Network Address Translation) - Billion BiPAC 7404VNOX User Manual

Edit One-to-One NAT (Network Address Translation)

One-to-One NAT maps a specific private/local IP address to a global/public IP address.
If you have multiple public/WAN IP addresses from you ISP, you are eligible for One-to-One NAT
to utilize these IP addresses.
Go to Configuration > Virtual Server > Edit One-to-one NAT
NAT Type: Select desired NAT type. As set in default setting, it disables the One-to-One NAT
function.
Global IP Address:
Subnet: The subnet of the public/WAN IP address given by your ISP.
pro- vided this information, you may insert it here. Otherwise, use IP Range method.
IP Range: The IP address range of your public/WAN IP addresses. For example, IP:
192.168.1.1, end IP:
192.168.1.10
Select the Apply button to apply your changes.
Check to create a new One-to-One NAT rule:
171
If your ISP has