Billion BiPAC 7404VNOX User Manual page 108

Configuring Packet Filter:
1. Click Packet Filters. You will then be presented with the predefined port filter rules screen (in
this case for the low security level), shown below:
Note: You may click Edit the predefined rule instead of Delete it. This is an example to show
to how you add a filter on your own.
2. Click on the delete radio button on the right column of the HTTP rule you wish to delete. Then
click the Edit/Delete button to delete HTTP rule.
3. Input the Rule Name, Time Schedule, Source/Destination IP, Type, Source/Destination Port,
Inbound and Outbound.
105