Note: You should setup each VLAN group with caution. Each Bridge Interface is arranged in
this order.
Bridge Interface
ethernet
ethernet1
ethernet2
ethernet3
Wireless
Management Interface: To specify which VLAN group has possibility to do device management,
like doing web management.
Note: NAT/NAPT can be applied to management interface only.
Ethernet
Primary IP Address
IP Address: The default IP on this router.
Subnet Mask: The default subnet mask on this router.
RIP: RIP v1, RIP v2, and RIP v2 Multicast. Check to enable RIP function.
VLAN Port (Always starts with)
P1 / P2 / P3 / P4 / Wireless
P2 / P3 / P4 / Wireless
P3 / P4 / Wireless
P4 / Wireless
Wireless
42