Chapter 5: Troubleshooting - Billion BiPAC 7404VNOX User Manual

Chapter 5: Troubleshooting

If your router is not functioning properly, please refer to the suggested solutions provided in this
chapter. If your problems persist or the suggested solutions do not meet your needs, please kindly
contact your service provider for support.
Problems with the router
Problem
None of the LEDs lit when the router is
turned on.
You have forgotten your login username
and/or password
Problems with WAN interface
Problem
Initialization of PVC connection (line-
sync)fail
Frequent loss of ADSL linesync
(disconnection)
Suggested Action
Check the connection between the router and the
adapter. If the problem persists, most likely it is due
to the malfunction of your hardware. Please contact
your service provider for technical support.
Try the default username "admin" and password
"admin". If this fails, you can restore your router to
its factory settings by holding the Reset button on
the back of your router more than 6 seconds.
Suggested Action
Make sure that the telephone cable is properly
connected between the ADSL port and the wall jack.
The ADSL LED on the front panel should lit. Check
that your VPI, VCI, encapsulation type and type of
multiplexing settings are the same as those provided
by your ISP. Reboot the router GE. If you still have
problem, you may need to verify these settings with
your ISP.
Make sure that all devices (e.g telephone, fax machine,
analogue modems) that are connected to the telephone
line as your router have a line filter connected between
them and the wall outlet (unless your are using a Central
Splitter or Central Filter installed by a qualified and
licensed electrician). Make sure that all line filters are
correctly installed as missing line filters or incorrect
installation of line filters can cause ADSL connection
problem, including frequent disconnections.
186