Device Description
The Front LEDs
LED
1
Power
Ethernet
2
1x - 4x
(RJ-45 connector)
3
USB
4
Wireless
Phone 1x-2x
5
(RJ-11 connector)
Line
6
(Router with
LINE
VoIP 1x-2x
7
(RJ-11 connector)
8
DSL
9
Internet
Both red and green LEDs lit together when power is ON.
Lit red means system failure.
Restart the device or contact support.
Lit green when the device is ready.
Lit when one of the LAN ports is connected to an Ethernet device.
Lit green when transmission rate hits 1000Mbps,
Lit orange when it hits 100Mbps but no light for 10Mbps.
Flash when data is being Transmitted / Received.
Lit green when the router is connected to a USB device.
Flash when data is received / transmitted.
Lit green when a wireless connection is established.
Flash when the device is sending/receiving data.
Flash once per second while Wi-Fi protected setup is in progress.
Lit green when phone is off hook.
Lit green when the inbound and outbound calls are transmitted
through PSTN.
Lit green when phone 1 has registered successfully.
Lit orange when phone 2 has registered successfully.
If both phone 1 & 2 have succeeded in registration, both green and
orange LEDs will lit together.
Lit Green when the device is successfully connected to an ADSL
DSLAM. ("line sync").
Lit red when WAN port fails to get IP address.
Lit green when WAN port gets IP address successfully.
Lit off when the device is in bridge mode or when WAN connection is
absent.
Meaning
6