Obtain An Ip Address Automatically - Billion BiPAC 7404VNOX User Manual

Obtain an IP Address Automatically

When connecting to the ISP, This router also functions as a DHCP client. It can automatically
obtain an IP address, netmask, gateway address, and DNS server addresses if the ISP assigns
this information via DHCP.
Profile Port: Select the profile port as EWAN.
Protocol: Select Obtain an IP Address Automatically.
NAT: The NAT (Network Address Translation) feature allows multiple users to access the
Internet through a single IP account, sharing the single IP address. If PCs in LAN should share
the WAN IP for WAN access, please enable NAT. If users on your LAN have public IP addresses
and can access the Internet directly, the NAT function can be disabled.
MAC Spoofing: Select Enable and enter a MAC address that will temporarily change your
router's MAC address to the one you have specified in this field. Leave it as Disabled if you do
not wish to change the MAC address of your router.
Obtain DNS: Select Automatic to use DNS.
Primary DNS/ Secondary DNS: Enter the IP addresses of the DNS servers. The DNS servers
are passed to the DHCP clients along with the IP address and the subnet mask.
IPv6: check to enable IPv6 service. Enter IPv6 Gateway address and set IPv6 DNS as same in
IPv4 mode.
Gateway: type the gateway address to which WAN packets are forwarded.
Obtain IPv6 DNS: check Automatic to obtain DNS automatically. If not, please type the
concrete ones in the Primary and Secondary fields.
85