Polycom VVX 500 Owner's Manual page 47

1. Assemble the Desk Phones
Use the included coiled handset cord and connect one end into the base
of the handset and the other end into the handset port on the back of the
phone .
(There is a handset and a headset port.)
2. Connect the Desk Phone
Option 1: Connect Desk Phones using your existing data network
Use the included LAN cable, connect one end into the port on the back of
the phone labeled and connect the other end into any data port on your
network (router, switch or wall jack).
Option 2: Connect Desk phones using your existing data network then
connect the phones to your computer
If you already have a computer using a wall data jack or router/switch port,
unplug the computer from the network, then connect the phone using the
steps in Option 1. Plug your computer into the port on the back of the phone
labeled
Owner's Manual
47