Inbound Caller Id; Ending Calls; Forwarding Calls - Polycom VVX 500 Owner's Manual

Disabling Automatic Answer:
1.
2.
3.
4.

Inbound Caller ID

Caller ID Name and Number are presented on the screen of your phone
with each inbound call. If you are using a Simultaneous hunt group the
name of that hunt group will also be passed through to the display of your
phone.
Changes to your Outbound Caller ID Name need to be made through
Note

Ending Calls

To end a call:
Do one of the following:
If you are using the handset, Tap
•
If you are using a headset, press
•
If you are using the speakerphone, press.
•
Tap
•

Forwarding Calls

You can configure your phone so that all incoming calls are forwarded to
another party (refer to Static Forwarding). You can also forward calls while
your phone rings (refer to Dynamic Forwarding).
All incoming calls can be forwarded to voicemail while Do Not Disturb is
enabled on your phone.
Static Forwarding
Static Forwarding allows you to send ALL incoming call to another phone
number or extension. When Static Forwarding is enabled, your phone will
not ring.
Press > Settings> Basic> Preferences> Auto
Answer
Highlight and Select Auto Answer SIP Calls
Tap No
Tap Save
customer service.
in the display.
16
or replace the handset.
.
Owner's Manual