Table of Contents
Advertisement
DVD-ROM Installation
The top cover of the chassis must be opened to gain full access to the DVD-ROM
drive bay. The 6026T-3RF accomodates only slim type DVD-ROM drives. Side
mounting brackets are typically needed to mount a slim DVD-ROM drive in the
server.
Accessing the Inside of the Chassis
1.
Grasp the two handles on either side and pull the unit straight out until it
locks (you will hear a "click").
2.
Next, depress the two buttons on the top of the chassis to release the top
cover and at the same time, push the cover away from you until it stops. You
can then lift the top cover from the chassis to gain full access to the inside
of the server. Note: You must power down the system before installing or
removing fl oppy or IDE components.
Drives mount on rails and should "click" into place to be correctly and fully installed
in their bays.
Chapter 6: Advanced Chassis Setup
6-7
Advertisement
Table of Contents
