Table of Contents
Advertisement
S
S
UPER
ERVER 6026T-3RF User's Manual
Legacy USB Support
Select Enabled to use Legacy USB devices. If this item is set to Auto, Legacy USB
support will be automatically enabled if a legacy USB device is installed on the
motherboard, and vise versa. The settings are Disabled, and Enabled.
USB 2.0 Controller
Select Enabled to activate the onboard USB 2.0 controller. The options are Enabled
and Disabled. (The manufacturer's default setting is Enabled. This setting cannot
be changed by the user.)
USB 2.0 Controller Mode
This setting allows you to select the USB 2.0 Controller mode. The options are
Hi-Speed (480 Mbps) and Full Speed (12 Mbps).
BIOS EHCI Hand-Off
Select Enabled to enable BIOS Enhanced Host Controller Interface support to
provide a workaround solution for an operating system that does not have EHCI
Hand-Off support. When enabled, the EHCI Interface will be changed from the BIOS-
controlled to the OS-controlled. The options are Disabled and Enabled.
HDA Controller
Select Enabled to activate the onboard High-Defi nition Audio controller. The options
are Enabled and Disabled.
Reserved Page Rout
Select PCI to use PCI communication mode for the USB connections. Select LPC
to use LPC mode for the USB connections. The options are PCI and LPC.
IDE/SATA Confi guration
When this submenu is selected, the AMI BIOS automatically detects the presence
of the IDE devices and displays the following items:
SATA#1 Confi guration
If Compatible is selected, it sets SATA#1 to legacy compatibility mode, while se-
lecting Enhanced sets SATA#1 to native SATA mode. The options are Disabled,
Compatible and Enhanced.
Confi gure SATA#1 as
This feature allows the user to select the drive type for SATA#1. Select RAID
(Intel) to enable Intel's SATA RAID fi rmware to confi gure Intel's SATA RAID
settings. Select RAID (Adaptec) to enable Adaptec's SATA RAID fi rmware to
confi gure Adaptec's SATA RAID settings. Select AHCI to enable SATA Advanced
7-10
Advertisement
Table of Contents
