Table of Contents
Advertisement
Possible System Memory Allocation & Availability
System Device
Firmware Hub fl ash memory (System BIOS)
Local APIC
Area Reserved for the chipset
I/O APIC (4 Kbytes)
PCI Enumeration Area 1
PCI Express (256 MB)
PCI Enumeration Area 2 (if needed) -Aligned on
256-MB boundary-
VGA Memory
TSEG
Memory available for the OS & other applications
5-7
Adding PCI Add-On Cards
The 6026T-3RF can accommodate six low-profi le, full-length PCI add-on cards.
Installing an Add-on Card
1.
Begin by removing the shield for the PCI slot you wish to populate.
2.
Fully seat the card into the slot, pushing down with your thumbs evenly on
both sides of the card.
3.
Finish by using a screw to secure the top of the card shield to the chassis.
The PCI slot shields protect the serverboard and its components from EMI
and aid in proper ventilation, so make sure there is always a shield covering
each unused slot.
Chapter 5: Advanced Serverboard Setup
Size
Physical Memory
Remaining (-Available)
(4 GB Total System Memory)
1 MB
3.99 GB
4 KB
3.99 GB
2 MB
3.99 GB
4 KB
3.99 GB
256 MB
3.76 GB
256 MB
3.51 GB
512 MB
3.01 GB
16 MB
2.85 GB
1 MB
2.84 GB
2.84 GB
5-11
Advertisement
Table of Contents
