X8Dt3-F Quick Reference - Supero SUPERSERVER 6026T-3RF User Manual

Jumper Description
JBT1 CMOS Clear
2 2
JI C1/JI C2 SMB to PCI Slots
JPB BMC Enable/Disable
JPG1 VGA Enable/Disable
JPL1/JPL2 JLAN1/2 Enable/Disable
JPT1 TPM Support Enable/Disable
JPS1 SAS RAID Enable/Disable
JPS2 SAS RAID Select
JWD Watch Dog
Connector
COM1/COM2
FAN 1-8
Floppy
I-SATA0 ~ I-SATA5
J5
J6
JD1
JF1
JL1
JOH1
JPW1/JPW2
JPW3
JWOL
JLAN1
JLAN2
SAS0~3, SAS4~7
T-SGPIO-1/T-SGPIO-2
USB0/1
USB2, USB3
USB4/5, USB6/7
LED
D1
LE1
LES1/LES2
Chapter 5: Advanced Serverboard Setup

X8DT3-F Quick Reference

Description
COM1/COM2 Serial Port/Header
System/CPU Fan Headers (Fans 7~8: CPU Fans)
Floppy Disk Drive Connector
(Intel South Bridge) SATA Ports
2
IPMB I C Connector (for IPMI Card)
2
Power Supply SMBus I C Header
PWR LED/Speaker Header
Front Panel Connector
Chassis Intrusion Header
Overheat LED Header
8-pin 12V Power Connectors (Secondary Power)
24-pin ATX Power Connectors (Main Power)
Wake-On-LAN Header
LAN1 and LAN3 Ports
LAN2 and LAN4 Ports
SAS Ports
Serial General Purpose Input/Output Headers
Back Panel Universal Serial Bus (USB2.0) Ports
Type A USB2.0 Ports
USB2.0 Headers
Description
BMC Heartbeat LED Indicator
Onboard Standby Power LED Indicator
SAS LEDs (LES1: SAS Heartbeat, LES2: SAS Activity)
5-13
Default Setting
See Section 5-10
Pins 2-3 (Disabled)
Pins 1-2 (Disabled)
Pins 1-2 (Reset)
Pins 1-2 (Enabled)
Pins 1-2 (Enable)
Pins 1-2 (Enabled)
Closed (SR RAID)
Pins 1-2 (Reset)