Dvd-Rom Drive Installation - Supero SUPERSERVER 6017R-WRF User Manual

SUPERSERVER 6017R-WRF/NTF USER'S MANUAL
Installing/Removing a Hard Drive
1. To remove a carrier, push the release button located beside the drive LEDs.
2. Swing the colored handle fully out and use it to pull the unit straight out (see
Figure 6-5).
Note: Your operating system must have RAID support to enable the hot-plug ca-
pability of the hard drives.
Figure 6-5. Removing a Hard Drive from the Server
Warning: Enterprise level hard disk drives are recommended for use in
Supermicro chassis and servers. For information on recommended HDDs,
visit the Supermicro Web site at
storage/SAS-CompList.pdf

DVD-ROM Drive Installation

The top cover of the chassis must be opened to gain full access to the DVD-ROM
drive bay. The SuperServer 6017R-WRF/NTF accomodates only slim-line DVD-
ROM drives. Side mounting brackets are needed to mount a slim-line DVD-ROM
drive in the SuperServer 6017R-WRF/NTF server. You must power down the system
before installing or removing a DVD-ROM drive.
http://www.supermicro.com/products/nfo/fi les/
6-6