Camera System Control; Camera Zoom; Camera Focus; Ir Illuminator - High End Systems DL.1 User Manual

Camera System Control

Camera Zoom

The Camera Zoom parameter provide 16-bit control of the camera Zoom function.
The Zoom includes 18× optical and 12× digital zoom (216× combined). Adjust Zoom
from In (DMX value = 0) to Out (DMX value = 65535)

Camera Focus

The Camera Focus parameter provide 16-bit control of the camera Focus function.
Auto focus is active at DMX values = 0–511. Set Manual focus from In (Far End)
value = 512 to Out (Near End) value = 65535.

IR Illuminator

DL.1 fixtures with an integrated Camera System are equipped with an infrared
illuminator that can output infrared (IR) light for operating in a night vision mode.
The IR Illuminator parameter controls both the IR illuminator output and the
camera's infrared sensing option. DMX values = 0 – 63 are the default with
illuminator off and the camera set to sense the visible light spectrum. From
DMXvalues =64–127, the Illuminator remains off , but the camera's Auto IR function
is ON detecting ambient infrared light in the environment. The rest of the range
turns the Auto adjustment off and adjusts the amount of IR illuminator output from
FULL (DMX value = 128) to OFF (DMX value = 255).

Camera Shutter

You can create slow-motion and choppy-frame effects using the camera shutter
options. The Camera Shutter parameter provides six steps of frame rate control from
1 to 30 frames/second. DMX values = 0 – 63 set Full Auto Exposure and is the default
option.

White Balance

The White Balance parameter adjusts for the variation in what is perceived as
"White" in different light conditions. The Auto White Balance mode computes the
white balance value output using color information from the entire screen. It outputs
the proper value using the color temperature on a range of values from 3000 to
7500K and is the default setting. Other settings for this Parameter accommodate
Indoor and Outdoor lighting conditions.

Orientation

You can Vertically Invert (Flip) or Horizontally Invert (Mirror) the image being
viewed by the camera using the Orientation parameter. All four combinations of
Vertical and Horizontal Invert are available.

Camera Effects

The Camera Effects parameter can convert an image to black and white (B&W), or
can invert the color (Negative art). A snapshot can also be taken of the image (Freeze
Frame) with or without one of these effects applied.
4-6 DMX Programming DL.1 User Manual