Fixture Hours; Fixture Hours Reset; Lamp Hours; Projector Status - High End Systems DL.1 User Manual

Fixture Hours

Use this option to view the fixture operation time in hours and minutes.

Fixture Hours Reset

Use this option to reset the fixture operation time to zero.
To access the FIXTURE HOURS RESET option:
1. Press the Menu button to unlock the menu system or to move back up the system
to the top level menus.
2. Use the left and right arrows on the Navigation button to scroll to the
INFORMATION MENU and press the Enter button to select.
3. Use the left and right arrows on the Navigation button to scroll to the
FIXTURE HOURS RESET option and press the Enter button to select.
4. Use the up and down arrows on the Navigation button to scroll to YES. Press and
hold the Enter button down for 5 seconds to select.

Lamp Hours

Use this option to view the lamp operation time in hours and minutes.

Projector Status

Power to the internal projector can be turned ON or OFF with this option.

Projector Hours Reset

Selecting this option displays the number of times the projector lamp hours have
been reset.

Software Version

This option display's the fixture's software version as: V(Major).(Minor).(Build)

Module Versions Menu

This option display's the hardware and software versions for the selected board .
The DL.1 fixture has the following driver boards:
• Pan
• Tilt
• RS232
• Fan
• Zoom-Focus-Iris
• Display
The menu displays NOT AVAILABLE if the version cannot be read from the selected
board.
3-18 Fixture Operation DL.1 User Manual