Fixture Mode Menu; Crossloading Fixture Software - High End Systems DL.1 User Manual

Fixture Mode Menu

The Mode menu crossloads software from one fixture to other fixtures on the link.
Note: Fixtures receiving the crossloaded data must not be in shutdown mode.

Crossloading Fixture Software

A fixture running a newer software version can load the new software to all other
Catalyst systems on the link using the CROSSLOAD FIRMWARE menu option.
To CROSSLOAD FIRMWARE from one fixture to all DL.1 fixtures on the link:
1. Disconnect or bypass any controllers, serial data distributors, data line
optoisolators, and any fixtures using RS-422 communications (such as
®
Dataflash AF1000 xenon strobes, and Intellabeam
block communication between the crossloading fixture and any other fixtures on
the link.
2. On the crossloading fixture only, unlock the menu system by pressing and
holding down the Menu button until the extended 2-line display appears
indicating the top menu level.
3. Using the left and right arrows on the Navigation button, scroll to the FIXTURE
MODE MENU and press the Enter button to select.
4. Use the left and right arrows on the Navigation button to scroll to CROSSLOAD
FIRMWARE.
5. Use the up and down arrows on the Navigation button to scroll to the YES option
and press the Enter button to store. The fixture will upload its software to all
other fixtures on the link.
When the crossload has finished successfully, CROSSLOADING COMPLETE will appear
briefly in the display of the crossloading fixture, and all other fixtures will
automatically home.
Note: If a new boot code was included with the latest software, the fixture
displays a BOOTDIFF error when it returns to the locked mode of the menu
system. To correct the boot code, copy the new boot code to each fixture
(see "Copying the Boot Code" on page 4-15).
3-14 Fixture Operation
®
fixtures). These devices will
DL.1 User Manual