Dmx Values Menu; Temperatures Menu; Figure 3-3 Reading The Dmx Values Menu Display - High End Systems DL.1 User Manual

DMX Values Menu

This menu displays the current values for
the DMX link. When viewing DMX value
settings by Channel, the DL.1 fixture
displays current values for Channels 001–
512 in two lines of three DMX values each
per screen. Figure 3-3 shows an example of
the first two lines displayed. The number at
the beginning of each line indicates the first
channel with a value displayed on that line.
To View DMX Values:
1. Press the Menu button to unlock the menu system or to move back up the system
to the top level menus.
2. Use the left and right arrows on the Navigation button to scroll to the
INFORMATION MENU and press the Enter button to select.
3. Use the left and right arrows on the Navigation button to scroll to the
DMX VALUES MENU option and press the Enter button to select. The display will
read BY CHANNEL.
4. Press the Enter button to select.
5. Scroll through the DMX values listed to the desired Channel.

Temperatures Menu

This menu displays the fixture's internal temperature at the Intake and Lamp sensors
in degrees centigrade.
To access the Temperatures Menu:
1. Press the Menu button to unlock the menu system or to move back up the system
to the top level menus.
2. Use the left and right arrows on the Navigation button to scroll to the
INFORMATION MENU and press the Enter button to select.
3. Use the left and right arrows on the Navigation button to scroll to the
TEMPERATURE option and press the Enter button to select.
4. Use the left and right arrows on the Navigation button to scroll to
CURRENT, MINIMUM, MAXIMUM, or RESET and press the Enter button to select.
OR, to reset internal temperatures to the Current temperature:
Use the left and right arrows on the Navigation button to select a sensor and
press the Enter button to select, or (for the RESET option) select NO to not reset
the sensors, or YES to reset all sensors to current temperatures.
DL.1 User Manual
The table below
001
describes the first
004
two lines displayed
in the DMX
Channel
Values Menu
001
shown above it.
002
Scrolling down
003
reveals addition
004
channel values in
the same format 005
006
Figure 3-3 Reading the DMX
Values Menu Display
Fixture Operation 3-17
0 255 0
255 0 0
DMX Value
0
255
0
255
3
0
0