Align Pan Motors; New Air Filter - High End Systems DL.1 User Manual

Align Pan Motors

To realign the pan motors:
1. Press the Menu button to unlock the menu system or to move back up the system
to the top level menus.
2. Using the left and right arrows on the Navigation button, scroll through the top
level to SET PARAMETERS MENU and press the Enter button to select.
3. Using the left and right arrows on the Navigation button, scroll to ALIGN PAN
MOTORS.
4. Use the up and down arrows on the Navigation button to scroll to YES and press
the Enter button to select. The motor alignment sequence will begin.
Note: This operation takes 30 minutes to complete. Selecting NO/ABORT aborts
the sequence.

New Air Filter

Installing a new air filter or installing a new CPU board requires fixture recalibration.
To calibrate the fixture after installing a new air filter:
1. Press the Menu button to unlock the menu system or to move back up the system
to the top level menus.
2. Using the left and right arrows on the Navigation button, scroll through the top
level to SET PARAMETERS MENU and press the Enter button to select.
3. Using the left and right arrows on the Navigation button, scroll to NEW AIR
FILTER.
4. Use the up and down arrows on the Navigation button to scroll to YES and press
the Enter button to select. The recalibration sequence will begin.
DL.1 User Manual Fixture Operation 3-13
3