Mounting The Fixture; Recommended Mounting Orientation; Fog Machine Warning - High End Systems DL.1 User Manual

Mounting the Fixture

Recommended Mounting Orientation

High End Systems recommends mounting the DL.1 suspended vertically from a
support system (such as a truss), permanently to the ceiling, or freestanding on its
base.
Consider all the following Cautions and warnings before mounting the DL.1 fixture.
Caution: High End Systems does not recommend operation of the DL.2
fixture with the base perpendicular to the stage floor (fixture
mounted sideways). Sideways mounting will result in
significantly decreased lamp life.
Use a secondary safety cable when mounting this fixture.
Warnings: Equipment suitable for dry locations only. Do not expose this
equipment to rain or moisture.
Maintain a minimum focus distance of 1.4 meters from
1.4 m
combustible materials.
Do not mount on a flammable surface.

Fog Machine Warning

Like all high quality video projection units, the DL-1 fixture must be kept protected
from excessive amounts of glycol fog, mineral oil, and smoke. DL-1 incorporates
two-stage air filtering to reduce these risks to a minimum; however, the user must
follow these guidelines to ensure continued operation of the fixture:
• Air filters (both fixture and projector) should be checked and cleaned on a
regular basis. When used in a closed or fixed environment where fog or haze is
used, we recommend at least a weekly check.
• Do not situate DL-1 in areas of high fog density such as directly in front of a fog
machine or mineral oil hazer.
• Minimize the exposure of DL-1 to both glycol fog and mineral oil.
DL-1 is a highly complex and sensitive electro-optical device and care and thought in
how it is used, rigged, and positioned will maximize the product's life and your
investment.
Note: Failure to follow these guidelines and carry out regular maintenance will
void the warranty.
2-4 Setup and Configuration DL.1 User Manual