Camera Option - High End Systems DL.1 User Manual

To enable projector control:
1. Press the Menu button to unlock the menu system or to move back up the system
to the top level menus.
2. Using the left and right arrows on the Navigation button, scroll through the top
level to SET PARAMETERS MENU and press the Enter button to select.
3. Using the left and right arrows on the Navigation button, scroll to PROJECTOR
CTRL and press the Enter button to select .
4. Press the MENU button to return to the DL.1 menu system.
Limitations of Projector Control. The following projector options are not valid when
you're controlling the projector with its menu system:
• Digital video connectors do not function
• RCA connectors do not function
• Input 1 (computer control) does not function
• The USB connector does not function
• Component video connectors do not function
• Audio in connectors do not function
The only valid inputs are: Input 2 (which selects the RBGHV or VGA connectors) and
Input 3 (which selects the S-Video connector).
Caution: Do not physically connect both the RGBHV and VGA connectors.
Doing so can cause damage to the fixture and void the warranty.

Camera Option

The DL.1 software automatically recognizes whether the fixture is equipped with the
Camera System option and selectes the appropriate protocol.
To disable the Camera System option installed in a fixture and revert to the 12-
channel Reduced DMX Protocol:
1. Press the Menu button to unlock the menu system or to move back up the system
to the top level menus.
2. Using the left and right arrows on the Navigation button, scroll through the top
level to SET PARAMETERS MENU and press the Enter button to select.
3. Using the left and right arrows on the Navigation button, scroll to CAMERA
OPTION. The current state will be displayed.
4. Use the up and down arrows on the Navigation button to scroll to DISABLED and
press the Enter button to select.
3-12 Fixture Operation DL.1 User Manual