Installing A Line Cord Cap - U.k. Only; Vatic Fitter Heads Information - Danmark; Connecting Video; Figure 2-1 Video Connectors - High End Systems DL.1 User Manual

Warning: Class 1 equipment - This equipment must be earthed.

Installing a Line Cord Cap - U.K. Only

In the United Kingdom, the colours of the cores in the mains lead of this equipment
may not correspond with the colored markings identifying the terminals in the
fixture's plug. Therefore, install a line cord cap in accordance with the following
code:
• The core which is coloured green and yellow must be connected to the plug
terminal which is marked with the letter "E," or by the earth symbol
coloured green, or green and yellow.
• The core which is coloured blue must be connected to the terminal which is
marked with the letter "N" or coloured black.
• The core which is coloured brown must be connected to the terminal which
is marked with the letter "L " or coloured red.
Warning:Class 1 equipment - This equipment must be earthed.

Vatic Fitter Heads Information - Danmark

Advarsel: Beskyttelse mod elektrisk chock.
Vigtigt!
Lederne med gul/groen isolation maa kun tilsluttes en klemme maerket

Connecting Video

The DL.1 fixture has three sets of video connectors on its rear panel, as shown in
Figure 2-1.
2-2 Setup and Configuration
eller
S-Video VGA

Figure 2-1 Video Connectors

100-120V; 50-60Hz; 6.8A
200-240V; 50-60Hz; 3.4A
RGBHV
, or
DL.1 User Manual