Dial Delay; Optional Settings; Set-Up - BT SYNERGY 1400 User Manual

Optional settings

To adjust the dial delay
Press buttons in order shown
Your Synergy 1400 is supplied from the
factory with Dial Delay set to
This setting ensures your Synergy 1400
conforms to the UK network
requirments.
The Dial Delay may be altered to
or
SHORT
outside of the Public networks.
The
SHORT
when connected directly to your exchange
line since this may give rise to incorrect
signalling to the network. In certain
installations the delay may be set to
, which conforms to the regulatory
LONG
requirements.
Press the

SET-UP.

Press the
HANDSET.
Press the
BASE.
Press the
SECURITY PIN.
34
MED
LONG
for connection to equipment
setting be used
MAY NOT
button until display shows
button. Display shows
button. Display shows
button. Display shows
Press the
shows DIAL DELAY.
Press the
current setting (SHORT, MED, or LONG).
Press the
.
setting.
Press the
that the change has been made.
PLEASE NOTE
If you stop any procedure before it is completed,
your Synergy handset will revert to standby
after 20 seconds.
button until the display
button. Display shows
button to change the
button. A beep confirms